Feature
Model: YDE500/700
Name: OT light LED
● Super slim ABS white shell cover, more smart and slim. Streamlined, ultra-thin, enclosed head with reduced air resistance to minimize contamination. With ergonomic and sterile control, it is suitable for variety surgical situations. Solid state, energy efficient LED technology requires minimal energy to operate.
● Germany made OSRAM LED beads and French Gaggione lens guarantee a uniform nature cool lighting in surface and deep cavity procedures.
● Adopted single 1w LED beads, lighting double traverse technology combine automatic shadow eliminating tech and Anti-dizziness tech. The shell covers have great heat dissipation, generating essentially ZERO infrared or ultraviolet light, high efficiency beads layout is superior than other type designs, can get an almost unlimited LED life expectancy.
YDE500/700 with 500mm (19.7in) and 700mm(27.6in) diameter contains 45+60 LEDs almost comes to 190,000 lux illumination.
Introduction
NEW systems high illumination
YUDA YDE500/700, YDE500(160,000Lux) and YDE700(190,000Lux). New systems with higher illumination values can compensate maintained illluminance by ageing , working life and environmental influences.
Manual Focus,optional: electric focus
LCD touch screen panel control, endoscopy standard.
Double traverse lighting + Automatic Shadow eliminate technology+ anti-dizziness resolve
Greater light output is 2 or 3 times higher than other lights, clear spot profile and uniform illumination to deep cavity procedures.
New Cold LED light Source
Lowest ultraviolet and infrared in light spectrum, temperature rising less than 2℃. single1W German LED cost effective for hospitals.
Long Service Life Span
At least 100,000 hours LED life span, no need to replace LED beads. Low lifetime maintenance cost.
Multi-patch superposition tech on spot light, getting indirect lighting for comfort
Technical data | unit | 700 lamp head | 500 lamp head |
Spot center illumination in color temperature 5000K | Lux | 160,000--200,000 | 120,000-180,000 |
Color temperature | K | 3500-5500 | 3500-5000 |
Ra | 97 | 97 | |
50% Spot diameter d50 | mm | 150 | 150 |
10% Spot diameter d50 | mm | 300 | 300 |
Illuminance depth | cm | 130 | 100 |
Illuminance adjusting range | % | 25-100 | 25-100 |
Ultraviolet irradiance wavelength under 40nm | W/㎡ | ≤0.002 | ≤0.002 |
Focal distance adjusting mode | Manual/electric(optional) | Manual/electric(optional) | |
Beads power | W | 1W/unit×60beads | 1W/unit×45beads |
Power supply | 110V/220V 50Hz/60Hz | 110V/220V 50Hz/60Hz | |
Input power | W | 100 | 100 |
LED average life | H | ≥100，000 | ≥100，000 |
Installation ceiling height | m | 2.65-3.2 | 2.65-3.2 |
YUDA medical group operating lamp installation workshop and stock workshop. We owns 39 workshops and 4 factories, now we are merged into Grand group to owns more factories and workshops .
The essence of surgical lights is different from ordinary lights to meet the special requirements of surgery. The first is the brightness requirements of the operating room lighting, the second is the safe operation lighting, the third is the shadow-free requirement, the fourth is the cold light requirement, and the fifth is the mobile and disinfection requirement. Surgical lights include two series of integral reflective surgical lights and hole-shaped surgical lights.
The integral reflector surgical lamp is also a molecular mother lamp and a single lamp. Hole type surgical lights are also divided into letter lights and single lights. The operating light can ensure the brightness of the operating room. The surgeon in the operating room must be able to accurately distinguish contours, colors, and movements. Therefore, a light intensity close to the quality of daylight is required. Can provide at least 100,000 illuminance light intensity.
The maximum brightness of a single lamp is 150,000 illuminance, and the brightness of the surgical lamp can be steplessly adjusted. If a failure occurs during the operation, the spare bulb can be automatically switched for 0.3 seconds, so the surgical lamp can provide safe surgical lighting. The operating lamp can meet the requirements of non-shadow lighting through the multi-faceted reflector.
The reflective surface is formed by industrial stamping at one time. The reflectivity is 95% high, forming a uniform beam. The light beam reaching the operation area is formed at a distance of 80 cm from the light board to ensure the operation. When the doctor's shoulders, hands, and head block certain light sources, the brightness of the light, without shadows, can be kept very uniform.
